Seismologists have recorded a magnitude 4.5 earthquake in Mexico, with the epicentre located 84 km SW of Puerto Madero, Mexico. The event occurred at 13:29 UTC on Thursday, September 10, 2026 and originated at a depth of 10.0 km.
Seismic Context for Mexico
Mexico sits above the subduction zone where the Cocos and Rivera plates plunge beneath the North American and Caribbean plates. Additionally, the Gulf of California rift and the Jalisco Block add further complexity to its seismic hazard.
Mexico City is particularly vulnerable due to its location on drained lakebed sediments that amplify seismic waves — an effect dramatically demonstrated in the 1985 Mexico City earthquake (M8.0) and again in the 2017 Puebla earthquake (M7.1). Both events underscored the critical importance of building codes and early-warning systems.
About This Event
At a focal depth of 10.0 km, this is classified as a shallow earthquake (0–70 km). Shallow events are typically the most damaging: the seismic energy has less distance to travel before reaching the surface, resulting in stronger and more abrupt ground shaking at the epicentre.
In terms of felt effects, a magnitude 4.5 earthquake is typically felt strongly by everyone; minor to moderate damage possible in vulnerable buildings. Moderate earthquakes are felt by virtually everyone near the epicentre. Strong shaking lasting 10–30 seconds can topple unsecured items, crack plaster, and cause poorly anchored objects to fall. Aftershocks are common following moderate events.
Understanding the Magnitude Scale
Earthquake magnitude is measured on a logarithmic scale — meaning each whole-number increase corresponds to roughly 32 times more energy released and approximately 10 times greater ground motion amplitude. A magnitude 4.5 event therefore releases significantly more energy than its number alone might suggest to the casual observer.
A magnitude 4.5 earthquake releases approximately roughly 500 tonnes of TNT of energy. For comparison, this exceeds the energy released by most conventional explosive events and is sufficient to shift tectonic stress in measurable ways across a wide region.
Significant damage can occur to vulnerable structures — particularly unreinforced masonry, old adobe buildings, and poorly maintained older construction. Well-engineered modern buildings are designed to withstand this level of shaking with minimal structural impact, though contents may shift and non-structural elements (ceilings, partitions) can be damaged.
What to Do After an Earthquake
Keep an earthquake emergency kit accessible at home. It should include at least 72 hours of water (4 litres per person per day), non-perishable food, a first aid kit, torch, battery-powered radio, copies of important documents, and essential medications. Reviewing and restocking this kit annually is strongly recommended.
If you are on or near a coast and experience strong or prolonged earthquake shaking, treat it as a potential tsunami warning and move immediately to high ground. Do not wait for an official alert — natural warning signs (severe shaking, unusual sea withdrawal) are your first alert.
Staying Informed
Mexico's SASMEX (Sistema de Alerta Sísmica Mexicano) is one of the world's longest-running earthquake early-warning systems, capable of giving Mexico City up to 60–90 seconds of warning for major Guerrero Coast earthquakes.
QuakeWatch publishes real-time earthquake data sourced from the USGS global catalog — covering every detected seismic event worldwide, 24 hours a day. Visit our live map to see this and all other recent earthquakes, or explore our guide to earthquake magnitude for a deeper understanding of what these numbers mean in practice.
Building Codes and Earthquake Resilience
One of the most effective tools against earthquake damage is modern building codes that specify how structures must be designed and constructed to withstand seismic forces. Countries with active fault zones have developed increasingly sophisticated seismic design standards over the past 50 years. However, the gap between modern code-compliant buildings and older existing structures remains a critical challenge in earthquake risk reduction worldwide. Building retrofit programmes and public awareness campaigns are key components of any national earthquake preparedness strategy.
Comments (0)
No comments yet. Be the first!
Leave a Comment