M4.5 Earthquake Strikes 5 km SW of San Antonio, Colombia

Seismologists have recorded a magnitude 4.5 earthquake in Peru, with the epicentre located 5 km SW of San Antonio, Colombia. The event occurred at 18:48 UTC on Monday, September 21, 2026 and originated at a depth of 10.0 km.

Seismic Context for Peru

Peru lies along the Peru–Chile Trench where the Nazca Plate subducts beneath the South American Plate at roughly 7 cm per year, one of the fastest subduction rates on Earth. This builds enormous stress that is periodically released as powerful earthquakes.

Peru has experienced numerous devastating earthquakes, most notably the 1970 Ancash earthquake (M7.9, ~70,000 deaths — one of the deadliest in the Western Hemisphere) and the 2007 Pisco earthquake (M8.0). The coastal cities of Lima and Callao face significant hazard from both seismic and tsunami risks.

About This Event

At a focal depth of 10.0 km, this is classified as a shallow earthquake (0–70 km). Shallow events are typically the most damaging: the seismic energy has less distance to travel before reaching the surface, resulting in stronger and more abrupt ground shaking at the epicentre.

In terms of felt effects, a magnitude 4.5 earthquake is typically felt strongly by everyone; minor to moderate damage possible in vulnerable buildings. Moderate earthquakes are felt by virtually everyone near the epicentre. Strong shaking lasting 10–30 seconds can topple unsecured items, crack plaster, and cause poorly anchored objects to fall. Aftershocks are common following moderate events.

Understanding the Magnitude Scale

Earthquake magnitude is measured on a logarithmic scale — meaning each whole-number increase corresponds to roughly 32 times more energy released and approximately 10 times greater ground motion amplitude. A magnitude 4.5 event therefore releases significantly more energy than its number alone might suggest to the casual observer.

A magnitude 4.5 earthquake releases approximately roughly 500 tonnes of TNT of energy. For comparison, this exceeds the energy released by most conventional explosive events and is sufficient to shift tectonic stress in measurable ways across a wide region.

Significant damage can occur to vulnerable structures — particularly unreinforced masonry, old adobe buildings, and poorly maintained older construction. Well-engineered modern buildings are designed to withstand this level of shaking with minimal structural impact, though contents may shift and non-structural elements (ceilings, partitions) can be damaged.

What to Do After an Earthquake

Understanding the type of building you live or work in is one of the most important steps in earthquake preparedness. Older unreinforced masonry buildings and soft-storey apartment buildings are significantly more vulnerable than modern reinforced concrete or steel-frame structures. If you have concerns, consult a structural engineer.

The internationally recommended action during earthquake shaking is Drop, Cover, and Hold On: drop to your hands and knees, take cover under a sturdy table or desk (or protect your head with your arms if no shelter is available), and hold on until shaking stops. Do not run outside during shaking — most injuries occur when people attempt to move.

Staying Informed

Peru's Instituto Geofísico del Perú (IGP) monitors seismic activity. INDECI (Instituto Nacional de Defensa Civil) coordinates emergency response.

QuakeWatch publishes real-time earthquake data sourced from the USGS global catalog — covering every detected seismic event worldwide, 24 hours a day. Visit our live map to see this and all other recent earthquakes, or explore our guide to earthquake magnitude for a deeper understanding of what these numbers mean in practice.

How QuakeWatch Tracks This Event

QuakeWatch sources earthquake data directly from the USGS ComCat (Comprehensive Catalog), which aggregates data contributed by seismic networks worldwide including JMA (Japan), EMSC (Europe and Mediterranean), GFZ (Germany and global), Geoscience Australia, and dozens of national and regional networks. This data is refreshed every 60 seconds, ensuring that new earthquakes appear on our live map within minutes of being processed by the USGS. You can also submit a felt report for this earthquake directly on its detail page.